Ubiquiti Networks airVision Betriebsanweisung

Security Camera

8airCamIndoor Installation1. Remove the screw and knob that connect the Mounting Bracket Base to the camera attachment by turning the knob counter-cl

9Indoor Installation4. Unscrew the Plug on the back of the airCam. 5. Connect the Ethernet cable to the Ethernet port. 6. Insert the Mounting Brack

10airCam7. Position the Mounting Bracket in the desired location and use a pencil to mark the holes on the wall.8. Use a 6 mm drill bit to drill the

11Connecting the Power2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 3. Connect the power cord to t

12airCamairVisionDownload and install the latest version of the airVision software at downloads.ubnt.com/airvision; the airVision auto management feat

13Camera Configuration InterfaceCamera Configuration InterfaceAccess the Camera Configuration Interface if you have not yet installed airVision, or pl

14airCam6. The Main screen will appear and you should see a live video stream from the airCam.Note: If you need to change the airCam network settings

15Adjusting the Camera ViewAdjusting the Camera ViewAdjusts Camera Side to SideAdjusts Camera Up and DownAdjusts Mounting Bracket BaseAdjusts Camera

16airCamLimited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free

17Limited WarrantyReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from U

18airCamLimitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE

19ComplianceComplianceFCCChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to op

20airCamRoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its p

21ComplianceFrançaisLa directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne s

22airCamDeclaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavk

23Declaration of ConformityLatviski [Latvian]Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras

24airCamR061713—720-00053-01The Advanced Gigabit PoE Managed Switch from Ubiquiti NetworksPower your Ubiquiti devices with TOUGHSwitch™PoE. TOUGHSwit

www.ubnt.com© 2011-2013 Ubiquiti Networks, Inc. All rights reserved.Support support.ubnt.comCommunity community.ubnt.comDownloads downloads.ubnt.com

1IntroductionIntroductionThank you for purchasing the airCam™. This Quick Start Guide is designed to guide you through the installation of the airCam

2airCamHardware OverviewFrontSun ShadeLensremove plastic lens film before use

3Hardware OverviewBack Plug (for outdoor installations)Ethernet DoorMounting SlotsLEDsPower The Power LED will light steady orange when the airCam i

4airCamInstallation OverviewThe installation process is different depending on whether you are mounting the camera outdoors or indoors. Follow the ins

5Outdoor Installation1. Press down on the release to remove the Ethernet Door. Important: Do not remove the plug. Plug 2. Connect the Ethernet cab

6airCam3. Insert the Seal into the bottom of the camera and wrap the Seal around the Ethernet cable. Reconnect the Ethernet Door to the airCam, leavi

7Outdoor Installation5. There are three recessed areas for the Ethernet cable on the Mounting Bracket Base. Thread the Ethernet cable through two of