Ubiquiti Networks M365 Betriebsanweisung

High-Performance airMAX™ BridgeModel: NBM3/NBM365/NBM900

3. Attach the Mounting Bracket to the Dish Bracket using the four M8x15 Carriage Bolts and four M8 Flange Nuts.10104. Install the NanoBridge by lini

5. Attach the Dish Assembly to the pole using the two U-Bolts, two Pole Clamps, and four M8 Flange Nuts. 1010Note: The mounting assembly can accommod

7. Connect the other end of the Ethernet cable from the NanoBridge to the Ethernet port labeled POE on the PoEAdapter.8. Connect an Ethernet cable

Accessing airOSVerify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the NanoBri

Installer Compliance ResponsibilityDevices must be professionally installed and it is the professional installer's responsibility to make sure th

SpecificationsNBM3/NBM365/NBM900DimensionsNBM3/NBM365NBM900492 x 440 x 705 mm543 x 440 x 725 mmWeightNBM3/NBM365NBM9000.9 kg (Radio)5.088 kg (Dish and

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

IntroductionThank you for purchasing the Ubiquiti Networks™ NanoBridge™. This Quick Start Guide is designed to guide you through the installation and

Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.To reduce potential radio interference to other users, the antenna type

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

© 2012-2013 Ubiquiti Networks, Inc. All rights reserved. JL080913Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETW

Hardware OverviewNBM3/NBM365 PortsSecondaryMainResetSecondary Port This 10/100 Ethernet port is used for bridging. Main Port This 10/100 Ethernet po

NBM900 PortsRP-SMALANResetRP-SMA Connector This connector can be used to connect an external antenna.LAN Port The 10/100 Ethernet port is used to co

NBM3/NBM365 LEDsLAN2LAN1Power The Power LED will light green when the device is connected to a power source. LAN1 Main The LAN1 Ethernet LED will li

*720-00064-01*720-00064-01NBM900 LEDsPower The Power LED will light green when the device is connected to a power source. Ethernet The Ethernet LED

Installation Requirements• 10 mm wrench• 13 mm wrench• Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and

InstallationThe installation instructions show the NBM900; however, the same instructions apply to the NBM3 and NBM365.1. Attach the Feed Support Tub

2. Attach the Dish Bracket to the Dish Reflector using the four M6x12 Carriage Bolts and four M6 Flange Nuts.1010