Ubiquiti Networks Bullet Betriebsanweisung Seite 1

Zero-Variable Outdoor RadioModels: BM2-Ti, BM5-Ti

Installer Compliance ResponsibilityDevices must be professionally installed and it is the professional installer’s responsibility to make sure the dev

SpecificationsBullet TitaniumProcessor Atheros MIPS 24KC, 400 MHzMemory 32 MB SDRAM, 8 MB FlashNetworking Interface (1) 10/100 Ethernet PortDimensions

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d

Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE

ComplianceFCCChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the eq

Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.To reduce potential radio interference to other users, the antenna type

Cet appareil numérique de la classe A est confrome à la norme NMB-003 Canada.Pour réduire le risque d’interférence aux autres utilisateurs, le type d’

RF Exposure WarningThe antennas used for this transmitter must be installed to provide a separation distance of at least 2.52 m from all persons and m

IntroductionThank you for purchasing the Ubiquiti Networks™ airMAX™ Bullet™ Titanium. This Quick Start Guide is designed to guide you through the inst

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

P051713—720-00034-01www.ubnt.com© 2011-2013 Ubiquiti Networks, Inc. All rights reserved.

Hardware OverviewN-Type ConnectorBullet Titanium RadioRubber WasherCable Gland BodyCompression NutEthernet PortCompression Seal

Hardware Installation1. Unscrew the Cable Gland Body and detach it from the Bullet Titanium Radio.2. Unscrew the Compression Nut and remove the Comp

3. Slide the Compression Nut over the Ethernet cable with the threaded end facing the RJ-45 connector. Slip the Compression Seal around the cable.4.

6. Securely screw the Cable Gland Body into the Bullet Titanium Radio so that the Rubber Washer seals the bottom of the radio.7. Tightly screw on t

8. Connect the Bullet Titanium to the N-Type connector of the antenna. Note: The Bullet Titanium should be mounted vertically to reduce stress on the

Connecting Power over Ethernet1. Connect the other end of the Ethernet cable from the Bullet Titanium to the Ethernet port labeled POE on the PoE Ada

Accessing the airOS Utility 1. Make sure that your host machine is connected to the LAN that is connected to the Bullet Titanium. 2. Configure the E